Part Number BE040 (specify member of family)
Definition
The Morgan family is a versatile, robust set of DC motor controllers. They are designed for traditional brushed DC permanent magnet motors up to 0.63 hp. They are DSP controlled and use an H-bridge, unlike lower-grade controllers. They have been designed expressly for high-noise, challenging industrial environments where lower-grade SCR-based controllers routinely fail. Typically, the Morgans are line powered, but they may also be DC powered if an appropriate source is available (usually in robotic applications). They may be operated birectionally, and they may be operated in either an open or closed loop mode. In open loop mode a feedback sensor is not required, and the operator must assure that the motor speed is correct under all loads. In closed loop mode, a sophisticated PID algorithm assures correct speed and rapid response under load variations. A Hall sensor and magnet are included standard. Speed is set either by a panel potentiometer or by a 4-20mA input. The latter allows for connection to other systems or to a convenient remote operator speed control device. Such a device is available as an option below. The Morgan is protected from stall conditions, electrical transients and short circuits.
The Morgan family is a versatile, robust set of DC motor controllers. They are designed for traditional brushed DC permanent magnet motors up to 0.63 hp. They are DSP controlled and use an H-bridge, unlike lower-grade controllers. They have been designed expressly for high-noise, challenging industrial environments where lower-grade SCR-based controllers routinely fail. Typically, the Morgans are line powered, but they may also be DC powered if an appropriate source is available (usually in robotic applications). They may be operated birectionally, and they may be operated in either an open or closed loop mode. In open loop mode a feedback sensor is not required, and the operator must assure that the motor speed is correct under all loads. In closed loop mode, a sophisticated PID algorithm assures correct speed and rapid response under load variations. A Hall sensor and magnet are included standard. Speed is set either by a panel potentiometer or by a 4-20mA input. The latter allows for connection to other systems or to a convenient remote operator speed control device. Such a device is available as an option below. The Morgan is protected from stall conditions, electrical transients and short circuits.
Features
1. High efficiency, high reliability switching power supply.
1. High efficiency, high reliability switching power supply.
2. PWM output with
adjustable min / max.
3. Contact BOE for variable
voltage output.
4. Adjustable max current
(torque) for sensitive applications.
Basic Specifications
Speed: ±
Accuracy: 1%
Speed: ±
Accuracy: 1%
Standards
Full UL rated component design
Full UL rated component design
RoHS compliant
Meets CE specifications for portable electronic test equipment, nonmedical, nonsafety, radiated and conducted emissions.
Meets CE specifications for portable electronic test equipment, nonmedical, nonsafety, radiated and conducted emissions.
User Controls
Speed adjust: manual potentiometer or 4 – 20 mA input
For example, BE040-12-10 is the 12V / 10A controller
Power
Line power in 90 – 240 VAC, fused, IEC
May be bypassed with DC rail voltage
Line power in 90 – 240 VAC, fused, IEC
May be bypassed with DC rail voltage
Inputs / Outputs
Bidirectional motor output Internal adjusts / jumpers:
Hall sensor input Open / closed loop operation
4 – 20 mA input Hall indicator for troubleshooting
Bidirectional motor output Internal adjusts / jumpers:
Hall sensor input Open / closed loop operation
4 – 20 mA input Hall indicator for troubleshooting
Direction
switch
Min / max speed envelope
PID parameters
Enclosure
Steel, NEMA 1, 0.048" thk, enamel grey
Steel, NEMA 1, 0.048" thk, enamel grey
Environmental
Temperature Range: -20 – 130 °F (-30 – 55 °C), RH < 75%
Temperature Range: -20 – 130 °F (-30 – 55 °C), RH < 75%
Accessories (
with Order # )
BE040.HALL Hall
sensor kit, 2m cable *
BE040.REMOTE Remote speed adjust, 5m cable
BE040.REMOTE Remote speed adjust, 5m cable
* Denotes included in standard package.
Copyright © 2009, Black Oak Engineering - Basic Instruments, LLC (BOE). All rights reserved. BOE reserves the right to make changes to these specifications as it deems necessary. All technical information contained herein is as accurate as possible; however, BOE shall not be held responsible for its use, nor for any infringements upon the rights of others which may result from its use. BOE products are not to be used in life support applications. All costs given herein are purely budgetary and are subject to change. Contact us for a quotation.
Warranty Policy. Any instrument ordered from BOE may be returned for full refund, less shipping costs, within 30 calendar days of delivery, provided that the instrument has not, in the opinion of BOE, been damaged or misused. An RMA number is required in all cases. See our Standard Terms & Conditions.
Basic Instruments are designed and manufactured in the USA, and they comply with ISO9001:2000.
#772 • Skiles Avenue • Piscataway, NJ 08855-0772