Part Number BE088
Definition
The Model ZA-1 is a benchtop instrument for measuring the complex electrical impedance of devices. It measures both real impedance magnitude and phase angle. Frequency sweeps can be easily programmed as well as measurements at user-set frequencies. It may be thought of as a scanning LCR meter. The latest generation Model ZA-1 uses advanced digital techniques to assure superior range, accuracy and stability. It is typically used to test cables, transmission lines, capacitors, inductors, transformers, and transducers. It is microcomputer controlled. Amplitude is adjustable. For component evaluation, statistical sorting bins can be set up. The Model ZA-1 is capable of measuring various combinations of RC, RL, LC, LCR. It also has a test function for Equivalent Series Resistance for capacitors. Surface mount adapters are available. The user interface is designed for easy use by personnel of all skill levels. Setup is menu-driven, and repetitive tests can be cycled with one key press. The Model ZA-1 is completely self-contained and does not require another computer to operate. The ZA-1 can, however, communicate results to another computer via serial link.
The Model ZA-1 is a benchtop instrument for measuring the complex electrical impedance of devices. It measures both real impedance magnitude and phase angle. Frequency sweeps can be easily programmed as well as measurements at user-set frequencies. It may be thought of as a scanning LCR meter. The latest generation Model ZA-1 uses advanced digital techniques to assure superior range, accuracy and stability. It is typically used to test cables, transmission lines, capacitors, inductors, transformers, and transducers. It is microcomputer controlled. Amplitude is adjustable. For component evaluation, statistical sorting bins can be set up. The Model ZA-1 is capable of measuring various combinations of RC, RL, LC, LCR. It also has a test function for Equivalent Series Resistance for capacitors. Surface mount adapters are available. The user interface is designed for easy use by personnel of all skill levels. Setup is menu-driven, and repetitive tests can be cycled with one key press. The Model ZA-1 is completely self-contained and does not require another computer to operate. The ZA-1 can, however, communicate results to another computer via serial link.
Basic Specifications
Frequency Range 2 Hz – 4 MHz
Scan Modes linear, logarithmic
Output Waveforms sawtooth, square, sinusoid
Scan Sample Time 10 ms – 2 s, user-set
Output THD < 2%, sinusoidal mode, f = 10 kHz
Output Power Limit 500 mW, output short protected
Amplitude Range 2.0 – 20 Vpp
DC Offset +/- 0.0 – 5.0 VDC
Pure Inductance Range 200 nH – 1 H
Pure Capacitance Range 30 pF – 3 mF
Pure Resistance Range 0.1 – 2 Mohm
Frequency Range 2 Hz – 4 MHz
Scan Modes linear, logarithmic
Output Waveforms sawtooth, square, sinusoid
Scan Sample Time 10 ms – 2 s, user-set
Output THD < 2%, sinusoidal mode, f = 10 kHz
Output Power Limit 500 mW, output short protected
Amplitude Range 2.0 – 20 Vpp
DC Offset +/- 0.0 – 5.0 VDC
Pure Inductance Range 200 nH – 1 H
Pure Capacitance Range 30 pF – 3 mF
Pure Resistance Range 0.1 – 2 Mohm
LCR
Accuracy
>0.5%
Output Impedance 50 ohm
Output Impedance 50 ohm
Frequency Stability 0.01
% / hr
Measurable Parameters ESR, Q, D, C, L, R, node search, series /parallel reactance
Kelvin Sense Input May be used for improved accuracy
Measurable Parameters ESR, Q, D, C, L, R, node search, series /parallel reactance
Kelvin Sense Input May be used for improved accuracy
Copyright © 2010, Black Oak Engineering - Basic Instruments, LLC (BOE). All rights reserved. BOE reserves the right to make changes to these specifications as it deems necessary. All technical information contained herein is as accurate as possible; however, BOE shall not be held responsible for its use, nor for any infringements upon the rights of others which may result from its use. BOE products are not to be used in life support applications. All costs given herein are purely budgetary and are subject to change. Contact us for a quotation.
Warranty Policy. Any instrument ordered from BOE may be returned for full refund, less shipping costs, within 30 calendar days of delivery, provided that the instrument has not, in the opinion of BOE, been damaged or misused. An RMA number is required in all cases. See our Standard Terms & Conditions.
Basic Instruments are designed and manufactured in the USA, and they comply with ISO9001:2000.
Office 263 • 1002 Lititz Pike • Lititz, PA, USA 17543